Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Takeuchi, Tomoaki; Otsuka, Noriaki; Shibagaki, Taro*; Komanome, Hirohisa*; Ueno, Shunji*; Tsuchiya, Kunihiko
Nihon Hozen Gakkai Dai-13-Kai Gakujutsu Koenkai Yoshishu, p.379 - 386, 2016/07
no abstracts in English
Shibata, Akira; Kitagishi, Shigeru; Watashi, Katsumi; Matsui, Yoshinori; Omi, Masao; Sozawa, Shizuo; Naka, Michihiro
Nihon Hozen Gakkai Dai-13-Kai Gakujutsu Koenkai Yoshishu, p.290 - 297, 2016/07
The exhaust stack of Japan Materials Testing Reactor Hot laboratory is a part of gaseous waste treatment system. It was built in 1970 and is 40 m in height. In 2015, thinning was found at some anchor bolts on base of the stack. When thinning of anchor bolts were investigated, gaps between anchor bolt nuts and flange plate was found. JAEA removed steel cylinder of stack which is 33 m in height for safety. In the end of investigation, thinning was found in all anchor bolts of the stack. Cause investigation for the thinning and the gaps were performed. It is concluded that the thinning was caused by water infiltration over a long period of time and the gaps were caused by elongation of thinning part of anchor bolts by the 2011 earthquake off the Pacific coast of Tohoku.
Takeuchi, Tomoaki; Otsuka, Noriaki; Tsuchiya, Kunihiko; Tanaka, Shigeo*; Ozawa, Osamu*; Komanome, Hirohisa*; Watanabe, Takashi*; Ueno, Shunji*
Nihon Hozen Gakkai Dai-13-Kai Gakujutsu Koenkai Yoshishu, p.391 - 394, 2016/07
no abstracts in English
Miura, Kuniaki*; Shibata, Hiroshi; Onizawa, Tatsuya*; Nakano, Hiroko; Takeno, Naofumi*; Takeuchi, Tomoaki; Tsuchiya, Kunihiko
Nihon Hozen Gakkai Dai-13-Kai Gakujutsu Koenkai Yoshishu, p.387 - 390, 2016/07
no abstracts in English
Masui, Kenji; Yamamoto, Masahiko; Kuno, Takehiko; Surugaya, Naoki
Nihon Hozen Gakkai Dai-13-Kai Gakujutsu Koenkai Yoshishu, p.25 - 30, 2016/07
no abstracts in English
Goto, Yuichi; Yamamoto, Masahiko; Kuno, Takehiko; Surugaya, Naoki
Nihon Hozen Gakkai Dai-13-Kai Gakujutsu Koenkai Yoshishu, p.31 - 34, 2016/07
Chloroprene rubber gaskets are often used to seal the glove box body and its panels. Such gaskets are deformed with compressive pressure and its elastic restoring force keeps sealing property. Therefore, gaskets play an important role in glove box sealing. However, physical properties of those used in glove box have not reported so far. In this study, hardness, elongation, tensile strength and compression set are investigated and its sealing performances are evaluated. The gaskets samples are taken from the glove box, which is used for 37 years. It is found that hardness, elongation and tensile strength of gaskets are changed due to the aging but its values are within the specification of chloroprene rubber. Also, the compression-set is less than the value that sealing performance is decreased. The results show that even the gaskets are used for long time, it has the property to keep sealing performances of glove box.
Tsuchiya, Kunihiko; Takeuchi, Tomoaki; Komanome, Hirohisa*; Miura, Kuniaki*; Araki, Masanori; Ishihara, Masahiro
Nihon Hozen Gakkai Dai-13-Kai Gakujutsu Koenkai Yoshishu, p.375 - 378, 2016/07
no abstracts in English